Tag Archives: Waterway

First impressions: Waterway Glide vs Leaderfins Flyer Pro

[gravatar size=18 align=absmiddle email=sanne.buurma@gmail.com] This is a post by [the_author_posts_link].

Last night Jorg and I had the chance to test our new Waterway Glide fin from www.finswimworld.com and it’s hard to not like it instantly. Although I’ve already tested with Daan and Judith’s Glide fin, we now had the chance to properly train some more with it. Although the technique to use for both these fins differs, I’ll try and put down my findings for both monofins independent from the technique used.


Waterway Glide Fin - Freediving
The first difference I noticed between the Leaderfin Flyer Pro and the Waterway Glide is the difference in buoyancy. The Leaderfins monofin has been built with 5 kilograms of lead in the arch, which contributes to the motion by stimulating it by lagging the motion. The Glide fin on the other hand has a positive buoyancy, which stimulates the glide phase by leveling the monofin out horizontally. I experienced the difference in buoyancy by trying to stay balanced through a 25 meter lane run. Where the Flyer Pro tends to start whirling left and right, the Glide seemed to stay at course. I checked with Jorg runs if these findings were also happening to him in the runs, which they did. So either this means, that the Flyer Pro needs more getting used to or more specific strength put into the blade. But out of the box it seems that the Glide does a better job at being balanced.


Leaderfins - Flyer
Leaderfins - Flyer
After swimming with the Flyer Pro I got used to having the weight from the arch help me in swinging the fin around and planting it against the wall quite effortless. But when I tried the Glide for a turn, I noticed that I needed to help out with my arms to swing around and plant the fin on the wall. Now of course this just needs some getting used to turning with the Glide fin, but it was a point which both Jorg and me immediately pointed out after trying it. Next training sessions will have more focus on making proper turns with the Glide, if we want to use it properly and not loose too much energy by pretending to be a bird underwater.

Having a tight fit into the foot pockets is essential with both monofins, to keep the efficiency of the throughput of power into the fin optimal. Both fins go at this a different way and of course in that way it’s not fair to compare these versions. But as we’re giving our first impressions on the difference in these fins, we’ll do it anyway ;).

The Flyer Pro doesn’t really feature an internal profile of a foot, but just a pocket with a tight band around the heel. Where as the glide does feature a more profiled inside pocket, which genuinely has advantages over just having a tight fit like the Flyer Pro. Even though both fins do have a proper tight fit and do not loose a lot of energy that way, the profile in the Glide fin makes it overall more comfortable to swim with.

Overall performance
If I compare the first thing I noticed between the two fins, it’s the fact that I need far less kick cycles to reach 25 meters. Where I use 3 kick cycles or more to reach the 25 meters with the Flyer Pro, I now seemed to be able to reach the other side by only using 2 kick cycles and one arm stroke. This is due to the fact that one fin is a glide fin and the other fin for a continuous motion, but I did want to point it out. As I believe it felt less of a hard performance to reach 50 meters if I compare both fins. Which in the end matters most, because with less energy wasted it will leave you with more distance in the end.

I believe that the Flyer Pro is a very good fin, but it doesn’t work out good the way I seem to be able to utilize it. (Also the reason to put the fin up for sale.) So for the time ahead we will try and optimize the use of the new Waterway Glide fin and I will write a more detailed impression about the experience with the fin when I have been training with the fin for an extended period of time.

The Gliding Freediver

[gravatar size=18 align=absmiddle email=jorg.jansen@gmail.com] This is a post by [the_author_posts_link].

WaterWayGlideFinFreedivingAs a result of our monofin training of the last couple of months Sanne and I have decided to get really serious with monofin training again. So we decided to order a Waterway Glide monofin.

After some tests in the last couple of weeks with the fins of Daan, Judith and Eric, the only option left to be sure for a good fin for the coming months was to get the Glide fin.

It should arrive around the first week of the new year, so hopefully our first pool training on January 9 will include the new fin already. Can’t wait to do some turns with it!